Nose Example Print File Design
Below is an example Nose letter file for printing, along with parameters for printing this file with pluronic.
Use these suggested print settings to fabricate this structure with pluronic. These settings are designed for a faster print and lower resolution than our normal suggested print settings with pluronic.
|Speed (mm/s)||Layer Height (mm)||Nozzle Diam (mm)||Gauge||Pressure (psi)||Print Temp (C)|
|6.0||0.2||0.6||30 gauge 0.25"||80||25|
First download the file and load it intio repetier host.
- Upload the slicing parameters to slic3r. From these starting parameters, you can adjust needle size, layer height and print speed.
- Slice and then save your gcode file
- Upload your file to the Allevi Software and print!