Lattice Examples

Image of a bioprinted pluronic lattice structure.

Image of a bioprinted pluronic lattice structure.


Below is an example lattice file for printing, along with a gcode and print parameters for printing this file with pluronic

Print Files

Print Settings

If beginning with the gcode file, you can simply upload the file directly to the Allevi software and print! Use these suggested print settings to fabricate this structure with pluronic.

Speed (mm/s) Layer Height (mm) Nozzle Diam (mm) Gauge Pressure (psi) Print Temp (C)
2.0 0.2 0.2 30 gauge 0.25" 40-50 25

File Preparation

If beginning with the .STL file, first download the file and load it intio repetier host.

  • Upload the slicing parameters to slic3r. From these starting parameters, you can adjust needle size, layer height and print speed. 
  • Slice and then save your gcode file
  • Upload your file to the Allevi Software and print!