FRESH Kidney Print

 
 Kidney Design printed with FRESH method using 2% (w/v) alginate.

Kidney Design printed with FRESH method using 2% (w/v) alginate.

Files

Print Settings

If beginning with the gcode file, you can simply upload the file directly to the Allevi software and print! Use these suggested print settings to fabricate this structure with the FRESH method using 2% (w/v) sodium alginate.

Speed (mm/s) Layer Height (mm) Nozzle Diam (mm) Gauge Pressure (psi) Print Temp (C)
6.0 0.1 0.1 30 1" 7-8 25

File Preparation

If beginning with the .STL file, first download the file and load it intio repetier host.

  • Next, adjust the size of the file by scaling it down to 0.25
  • Upload the slicing parameters to slic3r. From these starting parameters, you can adjust needle size, layer height and print speed. 
  • Slice and then save your gcode file
  • Upload your file to the Allevi Software and print!